uk.testseek.com  

 
 
Search:   
 

Home » Computers » Printers » 3D-Printers » XYZprinting da Vinci 1.0



Working
Please wait...

  Expert reviews    

Reviews of XYZprinting da Vinci 1.0

Testseek.co.uk have collected 34 expert reviews of the XYZprinting da Vinci 1.0 and the average rating is 73%. Scroll down and see all reviews for XYZprinting da Vinci 1.0.
 
(73%)
34 Reviews
Users
(65%)
60 Reviews
73 0 100 34

The editors liked

  • Cheap
  • Easy to use
  • Fine print quality
  • Well-designed software
  • Ready to use straight from the box
  • Fully encased print head and platform
  • Easy to use and replace cartridge filament
  • The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform
  • It's ready to use right out of the box
  • And it's priced much lower than competing devices
  • The XYZprinting Da Vinci Jr. 3D Printer is easy to set up and use
  • Requires no calibration and is currently the most inexpensive 3D printer on the market
  • Superb ease of use
  • Good print quality for the price

The editors didn't like

  • Flimsy case
  • Closed software and hardware system
  • Only XYZprinting filament can be used
  • Print quality isn't the best
  • The machine uses XYZprinting proprietary consumables
  • And you can't swap filaments during a print job. Its print-platform is not removable
  • Making it hard to clean
  • The printer is relatively bulky considering its small build platform. It uses XYZprinting proprietary consumables and glue may be needed for it to offer a high success rate
  • Occasional printing failures

Show Show

 

Reviews

page 2 of 4
Order by:
Score
 
  Published: 2014-10-29, Author: Liana , review by: wired.com

  • Abstract:  I've had the opportunity to test the 1.0 and the All-in-One. So far, I'm impressed with the print and build quality of both, but there is one hitch. A 3-D printer is more than just its extruder; unlike regular inkjet printers, 3-D printers are largely def...

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
-
 
  Published: 2014-10-28, review by: computerworld.com

  • While I only had a few days to review this printer prior to its release, I can say without hesitation it is the most sophisticated machine I've seen for the money.XYZ, a company that was only founded in 2011, has come out of the swinging in a very competi...

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
-
 
  Published: 2014-10-27, review by: tomsguide.com

  • Hassle-free building most of the time, Combines 3D printing & scanning in one unit, Software is simple and easy to use.
  • Hassle-free building most of the time, Combines 3D printing & scanning in one unit, Software is simple and easy to use
  • The da Vinci 1.0 AiO 3D Printer/Scanner combo offers decent quality 3D prints in ABS plastic. But the 3D scanner produced low-quality scans. XYZprinting released its first 3D printer last year: the da Vinci 1.0. The company isn't resting on its...

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
-
 
  Published: 2014-08-18, review by: toptenreviews.com

  • Abstract:  From XYZ Printing, the XYZ da Vinci budget 3D printer is a great option for first time users. The easy-to-use interface, convenient drip plate and extruder cleaner work together to make using the da Vinci effortless. Like most 3D printers, print quality d...

 
Was this review helpful?   
 
-
 
  Published: 2015-04-23, review by: cnet.com.au

  • The XYZprinting Da Vinci Jr. 3D Printer is easy to set up and use, requires no calibration and is currently the most inexpensive 3D printer on the market
  • The printer is relatively bulky considering its small build platform. It uses XYZprinting proprietary consumables and glue may be needed for it to offer a high success rate
  • The XYZprinting Da Vinci Jr. 3D Printer's low cost and high ease of use make it an ideal entry-level 3D printer for anyone....

 
Was this review helpful?   
 
(80%)
 
  Published: 2015-02-22, Author: Alastair , review by: techradar.com/au/

  • Ready to use straight from the box, Fully encased print head and platform, Easy to use and replace cartridge filament
  • Closed software and hardware system, Only XYZprinting filament can be used, Print quality isn't the best
  • More suited to an educational environment than a home, the Da Vinci 1.0 is easy to set up and use, but models lack the finish of more expensive printers....

 
Was this review helpful?   
 
(60%)
 
  Published: 2014-11-21, Author: Steven , review by: tweaktown.com

  • The whole notion of a device that prints objects might seem complicated to any novice who wants to get into 3D printing; however, the Da Vinci 1.0 really makes setup and operation as simple as possible. The Da Vinci 1.0 comes pre built, pre-calibrated, a...

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
  Award


(90%)
 
  Published: 2014-11-01, Author: Dong , review by: cnet.com.au

  • The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform, it's ready to use right out of the box, and it's priced much lower than competing devices
  • The machine uses XYZprinting proprietary consumables, and you can't swap filaments during a print job. Its print-platform is not removable, making it hard to clean
  • Affordable, reliable, and easy to use, the XYZprinting Da Vinci 1.0 AiO 3D Printer is great leap toward making 3D printing available to the masses....

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
(80%)
 
  Published: 2015-08-14, Author: M , review by: geekzone.co.nz

  • the printer delivered what it promises: an easy to use 3D printer that is affordable and creates good output...

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
-
 
  Published: 2018-12-03, review by: computerbild.de

  • Große Objekte druckbar, Hohe Präzision, Gute Beleuchtung des Druckraums, Einfacher Aufbau
  • Sehr geringe Druckqualität, Nicht ohne PC nutzbar, Etwas umständliche Bedienung, Hohe Geruchsbelästigung, Etwas lautes Betriebsgeräusch, Filament sehr teuer

 
Was this review helpful?   
 
(62%)
    page 2 of 4 « Previous   1 2 3 4   Next »  
 
More popular products from the same category


Join our Consumer Panel!

  • Infuence products of the future
  • Up to 3€ per answer
TestSeek will regularly send you survey invites to your email, you choose if and when you participate.

Join now! » (opens in a new window)


×